Loewe Spheros R 26 Model Vehicle User Manual


 
21 -
Operating modes – TV
Call additional functions
Select additional functions such as Image+
, Teletext
subtitles, Personal teletext pages, Headphone volume, Scan
stations and to move the picture up and down.
Call timer overview
If timer recordings have been programmed, you will see when
which station is recorded here.
Select picture format
The TV set sets the best picture format automatically when
Auto format is switched on. If you want to set a different
format, press this button until the desired format is selected or
select the format with .
You can switch the panorama picture over to distortion-free representation on
your TV set. Dark margins are then visible on the left and right of the picture.
Switching over: Keep the M or
button on the set pressed, at the same time
press the ”Picture format”
button on the remote control brie y.
Resetting: Press the same button combination again.
Move picture up/down
To make picture subtitles visible, you can useto move
the picture up or down with the picture formats "Panorama",
"Cinema" and "Zoom".
Note: for DVB-T stations in GB you can switch back and forth quickly between
two stations using this button.
TV menu
Call up the TV menu
You will nd a description of the picture and sound settings on page 19. The TV
menu offers other options for recording, connections and settings of the TV set.
For a recorder that is logged in, you can nd the following
menus in the "Recording":
Recording wizard - to programme new timer recordings
• Via EPG • Via teletext • Manual
You will nd further information about timer recording on page 33.
Timer list
Here you will nd a list of programmes programmed for recording. You can
change the recording data or delete programmed recordings and programme
new recordings.
Pre-record time and Post record time
For recordings without VPS/PDC, set a lead and lag time here so that the pro-
gramme is fully recorded despite any slight differences in the time.
Under "Connections" you will nd the following functions:
New devices/modi cations (connection wizard)
The connection wizard helps you connect and log in additional equipment such
as video recorders, DVD players/recorders, camcorders/digital cameras, pay TV
decoders, equipment with component signals and digital HDMI/DVI signals.
Antenna DVB
• Antenna DVB-T • Antenna DVB-S
(1
You can nd more information on pages 13 and 14.
Digital Link Plus
Transmission of the station data from the TV set to the video/DVD recorder if a
recorder with Digital Link Plus is connected.
Miscellaneous (connections)
Set AV norm for the connections manually (if it is not recognised automati-
cally).
"Assign audio digital signals" to one of the AV sockets.
"Allow switching voltage" to display the signals of the connected device
immediately on the screen via Euro AV during playback.
RGB insertions at AV2 to play back RGB signals at all station storage loca-
tions.
Select decoder stations and set sound encoding.
(1
only for sets with DVB-S
MENU
Image+
Teletext subtitles Personal teletext pages
Additional functions
off ...
INFO
END
Zoom
Cinema
Panorama
16:9
Picture format
4:3
END
Timer list Fri 12.09./14:12
12.09. 18:00-18:30 3SAT Die Köchin, die Putzfrau und d
Detail New recording Change
Delete
TEXT
INFO
OK
Picture adjustment ...
INFO
END
Settings
Connections
Recording
Sound
TV menu
Picture
Downloaded From TV-Manual.com Manuals