Filter
Top Products
41 -
Problem
Digital Link Plus does not function.
Various characters are displayed incorrectly in the
teletext.
No sound via external digital audio amplifier
Possible cause
a) Euro-AV cable is not fully wired (pin 10 not wired).
b) Some recorders can only adopt stations during the
initial installation of the TV set.
c) All or some of the terrestrial and cable stations are
stored on station storage locations ≥ 99.
The wrong character set is set in the teletext menu.
a) The external digital audio amplifier does not
support the selected sound format (Dolby Digital,
dts, MPEG).
b) TV set and external digital audio amplifier are not
connected.
Remedy
a) Replace the Euro-AV cable.
b) Restore the recorder to the as-delivered state (see
recorder’s operating instructions).
c) Rearrange the terrestrial and cable stations so
that they lie between 1 and 99.
Set the right character set: Teletext menu - Settings
- Character set: standard or the appropriate character
set.
a) Set PCM stereo on the DVD player in the sound
selection. For DVB stations, switch language/
sound selection (green coloured key) to Stereo
on the TV set in the status display (END).
b) Connect Digital-Out from the TV set to a Digital-In
of the external digital audio amplifier and select
the appropriate input to this.
What to do, if ...
BA32789_021XelosModusRel_5_GB.in41 41BA32789_021XelosModusRel_5_GB.in41 41 15.01.2007 16:57:0615.01.2007 16:57:06
Downloaded From TV-Manual.com Manuals