Filter
Top Products
- 3 -
2. Software Installation
To use the FireWire ExpressCard, the host computer must be equipped with one free
ExpressCard slot.
2.1. Windows 2000 installation
1. Insert the card into an available ExpressCard slot.
2. When the wizard indicates that it has found a driver for the device, click 'Next'.
3. The wizard will now copy the required files to the system and start the driver. After
starting the driver, the wizard will display a completion dialog, click 'Finish' to exit
the wizard.
2.2. Windows XP installation
1. Insert the card into an available Express Card slot.
2. When the wizard indicates that it has found a driver for the device, click 'Next'.
3. The wizard will now copy the required files to the system and start the driver. After
starting the driver, the wizard will display a completion dialog, click 'Finish' to exit
the wizard.
2.3.
Verifying the installation under Windows 2000 and XP
Follow the instructions in this section to verify that the controller was installed correctly.
1. Right click the 'My Computer' icon, select 'Properties', left click on the 'Hardware' tab
and then on the 'Device Manager' button.
2. Double click on 'IEEE 1394 Bus host Controllers'. If there is no yellow '!' or '?' in front
of 'Texas Instruments OHCI Compliant IEEE 1394 Host Controller' the driver has
started correctly.
3. To view information about the devices attached to the controller, right click on 'Devices'
and select ‘Properties' from the context menu, then select the tab labelled
'General'.