LG Electronics 42S19 Model Vehicle User Manual


 
73
PICTURE CONTROL
SSttaannddaarrdd
: Mode to reproduce original colour according to the standard of
input signal independent of the display characteristics.
WWiiddee::
Mode to use and set the rich colour area of the display.
Maximize the utilization for colour area that can be expressed.
Shows clearer and distinctive yet natural corners of the video.
This function is enabled in “Picture Mode-Cinema, Expert.”
*This feature is not available for all models.
This is the function to express richer colour.
This function is enabled in "Picture mode - Cinema, Expert" when xvYCC signal is
inputted through HDMI
*This feature is not available for all models.
As the technology to reduce the power consumption while keeping the same
brightness, this has the effect of reducing power consumption, improvement in
contrast.
Colour Gamut
(Wide/Standard)
Edge Enhancer
(Off/Low/High)
xvYCC
(Auto/off/on)
OPC
(On/Off)
Colour Standard
(SD/HD)
Converts the colour of a different video to HD colour. This function is set for SD
video (BT-601) and HD video (BT-709) colour format.
Expert Pattern
(Off/Expert1/Expert2)
Colour Filter
(Off/Red/Green/Blue)
Colour Temperature
[Expert Control]
(Medium/Warm/Cool)
Colour Management
System
As the tool used by the experts to make adjustments by using the test patterns, this
does not affect other colours but can be used to selectively adjust the 6 colour
areas (Red/Green/Blue/Cyan/Magenta/Yellow).
Colour difference may not be distinctive even when you make the adjustments for
the general video.
Adjusts Red/Green/Blue/Yellow/Cyan/Magenta.
Red/Green/Blue/Yellow/Cyan, Magenta Colour : The adjustment range
is -30 ~ +30.
Red/Green/Blue/Yellow/Cyan/Magenta Tint : The adjustment range is
-30 ~ +30.
This feature is disable in RGB-PC and HDMI (PC) mode.
This is the function to adjust the overall colour of the screen to the feeling you want.
a. • Method : 2 Points
Pattern: Inner, Outer
Red/Green/Blue Contrast, Red/Green/Blue Brightness:
The adjustment range is -50 ~ +50.
b.
Method : 10 point IRE
Pattern: Inner / Outer
IRE (Institute of Radio Engineers) is the unit to display the size of the video sig-
nal and can be set among 10, 20, 30 - 100. You can adjust Red, Green or Blue
according to each setting.
Luminance: This function displays calculated luminance value for 2.2 gamma. You
can input luminance value you want at 100 IRE, than the target luminance value for
2.2 gamma is displayed at every 10 steps from 10 IRE to 90 IRE.
Red/Green/Blue: The adjustment range is -50 ~ +50.
A
This is the pattern necessary for expert adjustment.
A
This function is enabled in "Picture Mode - Expert" when you watch DTV.
This is the function to filter the specific colours of the video.
You can use the RGB filter to set colour saturation and hue accurately.
Downloaded From TV-Manual.com Manuals