Filter
Top Products
4
Manual No. 701-123M 2/23/07
Land Pride
Assembly Instructions
Assembly Instructions for
Kit No. 701-053A
Front Rack mounted to Standard Brush
Guard (Reference Series 00 &10 ST Trekers)
Refer to Figure 3:
1. Align front two tabs on the Front Rack (#2) with top
two tabs on the Standard Brush Guard (#6). Insert
two 5/16"-18 x 1-1/2 GR5 Bolts (#7) through tabs in
Front Rack (#2), 5/8" long spacers (#3) and tabs in
Brush Guard (#6). Secure with 5/16" hex lock nuts
(#10). Do not tighten.
2. Attach back two tabs on Front Rack (#2) to the four
post accessory bar with two 1-1/2" U-Clamps (#4),
5/16" -18 x 2" lg. carriage bolts (#8), and 1 1/8" long
spacers (#5), secure with 5/16" hex lock nuts (#9).
Do not tighten.
3. Adjust the Front Rack (#2) to be level and centered
on the Treker.
4. Tighten all 5/16" hex lock nuts (#9 & #10) to 17 ft. lbs
of torque.
Front Rack Assembly To Standard Brush Guard
Series 00 & 10 ST Trekers
Figure 3
23719