Filter
Top Products
A B C
D
Step 10
Important: have two people complete steps 10-12. With assistance, lift one
table top onto the wheelbase; the legs will be facing outward. Have one
person support the top while it is resting on the base while the other
completes assembly.
Assemble crossbar to Jbars and support leg in the order shown. Note: a
Jbar with safety lever should be assembled on the right side (side with non
locking wheels) and a Jbar without lever on the left side (side with locking
wheels). The support leg is always assembled closest to the wheelbase. You
may need to lower table slightly to line up the bolt holes. Do not fully tighten
the bolts until both ends are assembled.
Assembly
2 Required
m8x45
2 Required
dia 16x8
2 Required
m26x19x6
2 Required
dia 30x8
E
F
G
16
Jbar
Support Leg
Jbar
Jbar
Support Leg
Jbar
Support Leg
Wheelbase