Kettler 08838-790 Riding Toy User Manual


 
4
The manufacturer reserves the right to make changes reflecting product or
other technical advances. The content of these instructions is accurate at the
date of printing.
USA
Assembly of the toy vehicle
The toy vehicle must be assembled carefully by an adult person. Study the assembly instruc-
tions carefully before beginning work. Assemble the vehicle in the exact sequence shown
by the letters in the diagrams. This is essential for the safe function and use of the tricycle.
Please note that there is
always
a danger of injury when working with tools or doing
manual work. Therefore please be careful when assembling this machine.
Ensure that your working area is free of possible sources of danger, for example don’t
leave any tools lying around. Always dispose packaging material in such a way that it
may not cause any danger. There is always a risk of suffocation if children play with
plastic bags!
Bolt all the parts together loosely at first, and check that they have been assembled cor-
rectly. Tighten the locknuts by hand until resistance is felt, then use spanner to final-
ly tighten nuts completely against resistance (locking device). Then check that
all screw connections have been tightened firmly. Attention: once locknuts have been
unscrewed they no longer function correctly (the locking device is destroyed), and
must be replaced.
The grips can be pushed onto the handlebars more easily if they are first soaked in warm
water.
Please keep original packaging of this article, so that it may be used for transport at a later
date, if necessary.
For technical reasons, we reserve the right to carry out preliminary assembly work (e.g.
addition of tubing plugs).
When ordering spare parts, always state the full item number, spare-part number, the
quantity required and the serial number of the product..
Example order: item # 08838-790 / spare part no. 12802003 / 1 piece/ S/N ...
Important: spare part prices do not include fastening material; if fastening material (bolts,
nuts, washers etc.) is required, this should be clearly stated on the
order by adding the words „with fastening material“.
KETTLER
®
International Inc., 1355 London Bridge Road · Virginia Beach VA 23453
For parts or service ONLY call 1-866-804-0440 or send e-mail to:
parts@kettlerusa.com
call (866) 804-0440 fax (757) 563-9273.
www.kettlerusa.com
info@kettlerusa.com