Filter
Top Products
Doll or Stuffed Toy Booster Seat Instruction Manual
Page 5
Installing the Doll Booster Using Vehicle Belts
To install the doll booster in a vehicle, you must carefully follow the instructions
provided by your vehicle manufacturer in addition to the information in this
manual. Before proceeding, be sure you have read and understand all of the
instructions in this section.
• Place the booster in a forward-facing position in the vehicle seat.
• Thread the vehicle seat belt through large oval opening on the side of the
booster behind the backrest, and then out through the other side.
See Figure 6.
• Buckle the vehicle seat belt, making sure the buckle tongue goes into the
correct buckle. The vehicle belt should not be twisted. See Figure 7.
• Secure the booster tightly into position by pushing down on the middle of
it with one knee or free hand while tightening the vehicle belt. Refer to your
vehicle owner’s manual for instructions to properly tighten the vehicle belt.
Figure 6 Figure 7
WARNINGS
• NEVER use this toy to hold a baby or child in a vehicle. Death or Serious
Injury may occur.
• DO NOT use as a booster seat for any dolls or stuffed toys that weigh more
than 7 pounds.
• NEVER leave the doll booster unsecured in vehicle. An unsecured doll or doll
booster can be thrown around and may injure you or your child in a sharp
turn, sudden stop, or crash.