Invacare 6907A Car Seat User Manual


  Open as PDF
of 4
 
4. Remove four (4) existing bolts A, B, C and D from side frame as shown in
FIGURE 3.
5. Position scissor mechanism guard against the side frame with the folded edge down.
Refer to FIGURE 3.
6. Align holes of scissor mechanism guard with holes on side frame.
7. Secure scissor mechanism guard to side frame with existing bolts A, B, C, and D.
8. Perform one (1) of the following:
A. FOR MODEL 6905A BUILT BEFORE 04/01/2002 - Install new side panel
with kit no. 1109705 and using instruction sheet no. 1109704.
B. FOR MODEL 6905A BUILT AFTER 04/01/2002 - Secure the side cover to
the recliner frame with the eleven (11) bolts. Refer to DETAIL B in FIGURE 2.
C. FOR MODELS 6907A, 6908A - Secure the side cover to the recliner frame
with the four (4) bolts. Refer to DETAIL "C" in FIGURE 2.
3
DETAIL A - MODEL 6905A
MANUFACTURED BEFORE
04/01/2002
Recliner Frame
Rivets
DETAIL C - REMOVING SIDE COVER MODELS 6907A AND 6908A
Rivets
Rivets
Recliner Frame
Bolts
Bolts
Bolts
DETAIL B - MODEL 6905A
MANUFACTURED AFTER
04/01/2002
NOTE: Side panel not shown to show rivet
locations.
FIGURE 2 - INSTALLING THE SCISSOR MECHANISM GUARD
Bolts
 previous