InStep 11-AR208 Stroller User Manual


 

11
ADJUSTING THE SHOULDER STRAP HEIGHT
Use these seat height slots to
properly adjust the height of
the shoulder straps to your
child’s height. To adjust the
shoulder strap height:
Starng from the back of
the seat, pull the shoulder
strap anchor away from
the seat. 
Insert the anchor through
the slot in the seat, pushing
it towards the front.

Re-insert the anchor
through the slit in the front
of the seat at the desired
height. 
Pull the strap and anchor
all the way through to the
back. Make sure the strap
is properly anchored on
the seat back. Repeat these
steps for the opposite
strap. 
USING THE SAFETY WRIST STRAP
Posion the strap on the inside of the rear axle.
Bring the two ends forward and slide the end with the large
loop through the small loop.
Hold the large loop and pull the strap ght to the rear axle.
Place your hand through the large loop so the strap is
comfortable and secure.

Using the jogging stroller without the safety wrist strap
may result in the user becoming separated from the
stroller and serious injury or death to the passenger.
Always use the safety wrist strap when using the jogging
stroller. Always engage the rear parking brakes before
removing the strap.


