Filter
Top Products
53
12
STEP 1:
MAJOR ADJUSTMENT:
STEP 1:
BE SURE THE BOTTOM DUAL HOLE BUMPER (53) OF THE
LIFT ARM ASSEMBLY REMAINS IN CONTACT WITH THE
BASE FRAME ASSEMBLY (12), AS SHOWN.
STEP 2:
ADJUST HEIGHT OF THE LIMITING STOP ASSEMBLY
(14) SO THAT IT IS IN CONTACT WITH THE DUAL HOLE
BUMPER (53), AS SHOWN. ONCE THE LIMITING STOP
IS PROPERLY ADJUSTED, WRENCH TIGHTEN
JAMNUT (28).
28
14
53
STEP 2:
- SOME PARTS MAY HAVE BEEN
OWNER'S MANUAL
REMOVED FOR CLARITY.
MACHINE ADJUSTMENT
RPL-5303 ASSEMBLY
PAGE 26
NOTE: