Filter
Top Products
Page - 14
HF4201 Assembly
A S S E M B LY
M A N U A L
HOIST FITNESS SYSTEMS
GENERAL MAINTENANCE INFORMATION
Links, Pull-Pins, Snap Locks, Swivels, Weight Stack Pins:
F Check all pieces for signs of visible wear or damage.
F Check springs in snap hooks and pull-pins for proper tension and alignment.
F If the spring sticks or has lost its rigidity, replace it immediately.
Upholstery:
F To ensure prolonged upholstery life and proper hygiene, all upholstered pads should be wiped down with a damp
cloth after every workout.
F Periodically take the time to use a mild soap or an approved vinyl upholstery cleaner to deter the onset of cracking or
drying. Avoid using any abrasive cleaners or cleaners not intended for use on vinyl.
F Replace ripped or worn upholstery immediately.
F Keep sharp or pointed objects clear of all upholstery.
Guide Rods:
F Wipe clean with a dust free rag. Lubricate once a week with a silicon or Teflon based lubricant.
Decals:
F Inspect and familiarized yourself with any safety warnings or other user information posted on each decal.
Nuts and Bolts:
F Inspect all nuts and bolts for any loosening and tighten if needed.
F Go through a re-tightening sequence periodically to ensure that all hardware is tensioned properly.
Anti-Skid Surfaces:
F These surfaces are designed to supply secure footing and need to be replaced if they appear worn or become slippery.
Cables:
F Hoist uses only Aircraft Quality Cable which meets or exceeds military specifications. Although our cables are
designed to last for years, to ensure optimum performance and as a routine safety precaution we recommend that all
cables be replaced yearly.
F Visually inspect the cable for fraying, cracking, peeling or discoloration.
F While the machine is not in use, carefully run your fingers along the cable to feel for thinning or bulging areas.
F Replace cables immediately at the first signs of damage or wear. Do not use equipment until cables have been
replaced.