Filter
Top Products
Page 2SKU 96126
For technical questions, please call 1-800-444-3353
SPECIFICATIONS
Gasoline Engine
Robin®/5FJXS.1271GA/Model#: EX130D500216711
127 cc 4.5 HP 4-cycle engine
Clutch Design Centrifugal Clutch
Drive Type A-710 V-Belt Drive
Engine Approvals 2006 EPA Phase II; 2006 CA Emissions Regulations
Maximum Beam Length 15’ with Spreaders
Screed Spreaders (2) 7-1/8”L x 21-1/8”W
Overall Dimensions 21-1/8”W x 34-7/8”L x 44-5/8”H
Net Weight 116 Lbs.
Save This Manual
You will need this manual for the safety warnings and precautions, assembly, operating,
inspection, maintenance and cleaning procedures, parts list and assembly diagram. Keep your
invoice with this manual. Write the invoice number on the inside of the front cover. Write the
product’s serial number in the back of the manual near the assembly diagram, or write month
and year of purchase if product has no number. Keep this manual and invoice in a safe and
dry place for future reference.
SAFETY RULES
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions listed below may result in
electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS
WARNING: When using tool, basic safety precautions should always be followed to reduce
the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
Keep work area clean. Cluttered areas invite injuries.
Observe work area conditions. Do not use machines or tools in damp or wet locations.
Don’t expose to rain. Keep work area well lit.
Keep children away. Children must never be allowed in the work area. Do not let them
handle machines, or tools. Never allow children to play with or climb on Screed.
Store idle equipment. When not in use, tools must be stored in a dry location to inhibit
rust. Always lock up tools and keep out of reach of children.
Use the right tool for the job. Do not attempt to force a small tool or attachment to
do the work of a larger industrial tool. There are certain applications for which this
tool was designed. It will do the job better and more safely at the rate for which it was
1.
2.
3.
4.
5.