Filter
Top Products
SKU 90849 Page 4
Assembly Drawing
SKU 91092
Step 1
Attach the front end of B to C1 & C2
with 6 bolts, washers and nuts (I).
Step 2
Attach F (right and left) with C1 and C2.
using 4 bolts, washers and nuts (I). Attach
D (right and left) to B (seat, back end) and
F using 4 bolts, washers and nuts (L).
Step 3
Connecting G with the back of A, using
2 bolts, washers & nuts (K).
G
A
Step 4
Attach A with D & G, using 4 screws (H).
Attach A with B, using 2 screws (H).
Step 5
Attach E1 and E2 to D, using 2 bolts,
washers and nuts (J). Attach E1 to C1
with screws (H). Repeat with E2 to C2
with (H).
Completed. Make sure all screws, nuts and
bolts are tightened and in place. Before using,
test the Rocker by rocking it back and forth
and being sure it is safe to operate.
C2
C1
D
I
F
B
C1
F
D
L