3.5 Attaching Canopy (on certain models)
1. Infant restraint comes with four (two
on certain models) identical canopy
support parts.
Thread one canopy support completely
through one sewn tunnel
➊.
2. Slide straight end of a second
support into the straight end of the
first support
➋.
3. On models with four canopy supports, repeat
steps one and two for the other canopy tunnel.
The canopy should appear as shown
➌.
4. Attach canopy in the areas between the
infant restraint and the handle base
➍.
➊
➋
➌
➍
14
To remove canopy:
Pull the canopy fabric back.
With both thumbs on the
center of the canopy bow,
wiggle back and forth while
pulling out on the two parts
of the canopy bow ➎.
➎