Filter
Top Products
31
8. NEVER put two LATCH connectors on one
vehicle LATCH anchor
.
9. Test child restraint for secure installation as
described in child restraint “Final Safety
Check” page 41.
10. Check that the LATCH stays tight and does not
slip from the tightened position. If it does not stay
tight, try another seating position or contact
Graco at 1-800-345-4109.
11. To remove LATCH, release the
tension on the LATCH connector
by pushing button in as shown
.
12. Press button on LATCH
.
13. Pull out (away from anchor point).
¡
.
14. Repeat steps 12 and 13 for other
connector.
¡