Graco PD247328A Car Seat User Manual


 
33
4. Tighten vehicle seat belt
Push down hard with your knee or free hand
in the middle of the child restraint . Then pull
and tighten the shoulder portion of the
lap/shoulder belt.
5. While pulling the shoulder portion of the
lap/shoulder belt, lay the shoulder belt inside the
opened lock-off
and snap the lock-off over the
shoulder belt .
Two lock-offs are provided to allow for the seat to be
installed on the right or left side of the vehicle seat.
Only use one lock-off at a time. NEVER try to use
both lock-offs when installing the child restraint.
DO NOT try to close the lock-off over anything
but the shoulder portion of the vehicle
lap/shoulder belt. If any other part of the belt
is in the way then try another seat location.
For more information on how to tighten the
belt for your seat belt system, see Section 8.0
Choosing an Appropriate Vehicle Seat Location,
p.19, or your vehicle owner’s manual.