Filter
Top Products
20
REAR-FACING INSTALLATION WITH LATCH
0ULLOUTONHANDLEONFRONTOFCHILD
restraint (a) and adjust to rear-facing
position 1 (b)-AKESURE
forward-facing LATCH belt is stored.
(see fig. c, pg. 40)
2. Place rear-facing ONVEHICLESEAT
equipped with LATCH anchors.
&OREASEOFINSTALLATIONEXTEND
LATCH BELTTOITSMAXIMUMLENGTH
4. Attach rear-facing connectors to
VEHICLELOWERANCHORS(c). Belt must lie
flat and not be twisted. Pull connectors
to be sure they are securely attached to
the anchor points. (d).
0RESSDOWNlRMLYINCENTEROFCHILD
restraint while pulling LATCH
adjustment belt through slot in
seat pad (e). 7HENlNISHEDTIGHTENING
MAKESUREFREEENDOFADJUSTMENTBELTIS
outside the seating area (f).
a
b
d
e
c
f
CLICK!
Slot