Filter
Top Products
34
10.3 With LATCH
Use vehicle belt (not LATCH connectors) for installations
with children weighing more than 48 pounds (21.7 kg).
NOTE: Some vehicle manufacturers have lower maximum
weight ratings for LATCH anchors, so you must
consult your vehicle owner’s manual or call the vehicle
manufacturer to confirm the limits on your vehicle’s
LATCH anchors.
1. Unhook LATCH from storage bars on the sides
of the seat. For ease of installation, extend LATCH
to its maximum length.
2. Place forward-facing on vehicle seat. Slide child
restraint back until the restraint is in contact with the
vehicle seat back.
3. Hook LATCH Connectors to vehicle lower
anchors
. Pull firmly on Connectors
to be sure they are attached. Belt must
lay flat and not be twisted.
4. Tighten LATCH by pushing down hard on
child restraint and pulling the adjustment belt .
5. If you need to remove LATCH to readjust,
pull up on LATCH plate to loosen strap.