Filter
Top Products
To Listen to Baby
• Turn on Nursery Unit using the On/Off Switch.
• Turn on one or both Parent Units using the On/Off Switch.
• The Sound Lights on the Parent Unit will illuminate as your child (or other objects) make noise near the Nursery Unit. Please
note that the Sound Lights and volume control on the Parent Unit are independent of each other. With the volume turned all
the way down, the Sound Lights will still illuminate as your child (or other objects) make noise near the Nursery Unit.
5
Changing the Volume
•The volume for each Nursery Unit is adjusted separately.
•Set the Room Select Switch to 1 or 2, to select Nursery Unit 1 or Nursery Unit 2.
•Adjust the volume of the selected Nursery Unit by pressing the Volume Up/Down Buttons.
•The Sound Lights illuminate as the volume button is pressed up or down to provide visual feedback of the volume level.
•The unit will beep louder or softer depending on the selected volume level.
•When no volume button has been pressed for two seconds, the unit will beep three times to indicate that the volume setting
has been stored. The unit will return to normal monitoring.
Changing the Monitoring Time
•The time the Parent Unit monitors each Nursery
Unit is adjusted separately.
•Set the Room Unit Select Switch to 1 or 2, to
select Nursery Unit 1 or Nursery Unit 2.
•Press and hold the Time Adjust button.
•Adjust the time by pressing the Volume
Up/Down Buttons.
•The Sound Lights illuminate as the volume but-
ton is pressed up or down to show the selected
time as shown.
•Release the Time Adjust Button. The unit will
beep three times to indicate that the time setting
has been stored. The unit will return to normal
monitoring.
•Only one Nursery Unit can be set to Off at a
time.
Orange
Sound Lights
for Nursery
Unit 1
Green
Sound Lights
for Nursery
Unit 2
Red Loss Connection LED
2min
1min
30 sec
10 sec
OFF