Filter
Top Products
NOTE: All air cap pattern shapes and lengths were
measured under the following conditions:
Distance to Target: 254 mm (10 in.)
Inlet Air Pressure: 3.4 bar (34 kPa, 50 psi)
Fan air: adjusted for maximum width with manual gun.
Fluid Flow Rate: 300 cc/min. (10 oz./min.)
Pattern shape and length are material–dependent.
2 309419
Air Caps
FAN PATTERN AIR CAPS (All Models)
Air Cap
Part
No.
Pattern
Shape
Pattern Length
with Wide Pattern Kit*
[without Wide Pattern Kit*] Recommended Fluids & Production Rates
24A438 Round End 381–432 mm (15–17 in.)
[330–381 mm (13–15 in.)]
Light to medium viscosity.
Up to 600 cc/min (20 oz/min).
24A279 Round End 356–406 mm (14–16 in.)
[330–381 mm (13–15 in.)]
Medium to high viscosity.
Up to 600 cc/min (20 oz/min).
24A376{ Tapered
End
432–483 mm (17–19 in.)
[330–381 mm (13–15 in.)]
Light to medium viscosity.
Up to 600 cc/min (20 oz/min).
24A274 Tapered
End
305–356 mm (12–14 in.)
[330–381 mm (13–15 in.)]
Light to medium viscosity.
Up to 600 cc/min (20 oz/min).
24A439 Tapered
End
279–330 mm (11–13 in.)
[254–305 mm (10–12 in.)]
For use with 2.0 mm nozzles.
Medium to high viscosity and high solids.
Up to 600 cc/min (20 oz/min).
24A275 Tapered
End
356–406 mm (14 –16 in.)
[297–348 mm (12–14 in.)]
Light to medium viscosity and high solids.
Aerospace coatings.
Up to 750 cc/min (25 oz/min).
* Wide Pattern Kit – Part No. 24A431
{ Also available in the following colors:
24A276 – blue
24A277 – red
24A278 – green
ROUND PATTERN KITS
Light to Medium Viscosity. Light to Medium Production.
PROt Xs Gun
Kit Part No.
(Manual No.)
Pattern
Diameter
245217
(309447)
102 to 152 mm
(4 to 6 in.)
245219
(309447)
203 to 254 mm
(8 to 10 in.)
277851
(313223)
Adjustable