Graco 2L03 Baby Accessories User Manual


 
,OW"ATTERY)NDICATION
Parent Unit
s)FOPERATEDTOOLONGONALOWBATTERYYOUMAYALSOEXPERIENCEAPOORSIGNALANDTHE
0OWER,%$ONTHEFRONTOFTHEPARENTUNITMAYCHANGEFROMGREENTORED
s9OUMAYEITHERTURNOFFTHEUNITPLUGINTHE!#ADAPTERORREPLACETHEBATTERIES
/UTOF2ANGE)NDICATION
s)FTHE0ARENT5NITBEGINSTOLOSETHESIGNALFROMTHE.URSERY5NITYOUMAY
hear static or other noise. Immediately move the Parent Unit closer to the
Nursery Unit to regain connection.
.OTE)TISNOTUNCOMMONFORTHE0ARENT5NITTOOCCASIONALLY
LOSEANDREGAINCONNECTIONWITHTHE.URSERY5NITIN
ENVIRONMENTSTHATHAVEASIGNIFICANTAMOUNTOFOBSTRUCTIONS
3ETTING5PTHE"ABY-ONITOR
1. For optimum operation, it is best to use new batteries in the Parent Unit.
2. Place the Nursery Unit within 10 feet (3 meters) of your baby. Plug an AC adapter into
the jack on the side of the Nursery Unit. Plug it into a working 120 volt AC outlet.
3. Aim the Nursery Unit toward your baby. Check that there are no walls or large objects
that could block sound transmission.
4. Set both the Nursery Unit and Parent Unit to the same channel, “A” or “B” (“X” or
h9v
5. Turn on the Nursery Unit using the On/Off switch on the side. The green power light
should come on.
6. Place the Parent Unit within five (5) feet (1.5 meters) of the Nursery Unit and turn on
the Parent Unit using the On/Off switch on the side of the unit. The green power light
should come on.
7. If you have 2 Parent Units, repeat same set-up procedure for 2
nd
Parent Unit if not
continue to Step 8.
9OURMONITORISNOWREADYFORUSE
4