Graco 2L01VIB Baby Monitor User Manual


 
Most problems have a simple
solution. First, check that:
• Power is turned ON for both units
• Both units are plugged in (or batteries are
fresh in Parent Unit)
• Electrical outlet works
• Volume is turned up on Parent Unit
• Parent Unit is in range of the Nursery Unit
No Sound
• Battery dead or weak — replace or use AC
adapter.
• AC adapter not properly connected —
check the connections.
• Nursery Unit covered or blocked —
remove the obstruction.
Weak Sound
• Nursery Unit too far from baby — move
closer.
• Large objects blocking the signal — try
repositioning Nursery Unit.
• Volume setting too low — turn it up.
DO NOT ATTEMPT to modify the unit. Any modifications to the transmitter
and/or receiver can void the operator’s authority to operate the equipment.
Static
• Interference from other electrical
equipment — eliminate cause of static
(TVs, mixers, computers, fans, fluorescent
lights, light dimmers, etc.)
• Parent Unit too far from Nursery Unit —
move them closer.
• Significant amount of obstructions
between Parent Unit and Nursery Unit such
as walls, ceilings & buildings. Try moving
the Nursery Unit to another part of the
room.
• Change channel on Nursery Unit.
Shrill Sound (Feedback)
• Nursery Unit and Parent Unit too close
together — move them farther apart.
• Volume set too high — lower the volume.
TroubleShooting
6