Filter
Top Products
A. Push the harness adjustment button
under the seat flap. Pull the shoulder
straps out to loosen the harness
➌
.
B. From behind seat, pull the metal
junction plate down behind the ownerÊ s
manual pocket and remove the ends of
the two shoulder straps from the metal
junction plate ➍.
C. From front, pull straps through the
harness slots and then reinsert them
through the appropriate slots. Both
harness straps must be through the
same set of slots in the seat and pad.
D. From behind seat, push both shoulder
straps UNDER ownerÊ s manual pocket
and out the bottom ➍.
E. Depending on the size of your child, you
may need to adjust the harness straps or
waist straps as shown on pages 23-24.
Reassemble the strap ends onto the metal
junction plate ➍.You will be able to use
various combinations of shoulder strap
loops and waist strap loops to get a snug
fit for your child.
5. SAFETY CHECK:
a) CHECK that straps are not twisted in front or back;
b) CHECK that straps are secure by pulling on harness
straps from the front of the seat.
g
r
a
c
o
b
a
b
y
c
o
m
➌
➍
Harness adjustment
button
Metal junction
plate
21