Filter
Top Products
6.2 Securing Child in Infant Restraint
Failure to properly secure your child in the infant restraint/carrier
increases the risk of serious injury or death from suffocation or falls,
or in the event of a sudden stop or crash. Even when used only as
a carrier, make sure the harness straps are properly secured.
1. Move infant restraint handle to sitting position (see page 10).
2. Open harness clip by squeezing both sides and
unbuckle as shown
➊.
3. Place your child in the infant
restraint as shown in
➋, not
➌
. Pull the harness straps
down over your child.
4. Insert the two buckle tongues into the harness buckle on the
crotch strap. Make sure that you hear each tongue click into
the buckle.
DO NOT use the infant restraint if the harness does not latch
in place. Call Graco at 1-800-345-4109.
➊
➋ ➌
28