Filter
Top Products
3
4 Feet Cover
Oven DoorOven Back
Outer Column - 2 Pieces
Oven Front
Inner Column - 2 Pieces
Tabletop - 2 Pieces
Assembled Parts
CAUTION
This package contains small parts.
For adult assembly only.
Inner Column Pieces
Assembly
Feet
4 Screws
1
3
2
• Fit the slot on a foot onto the tab on another foot. Repeat to
connect the other two feet to form a base.
• Fit the inner columns together, by inserting the tabs into the slots
on each piece.
• Push to “snap” each tab in place.
• Carefully turn the base assembly over. Insert four screws into the
base and tighten.
• Set the base assembly aside for assembly step 5.
Tighten and loosen all screws with a Phillips screwdriver.
Do not over-tighten.
#6 x ¾" (1,9 cm) Screw – 24
Shown Actual Size
Push near
each tab
Push near
each tab
(on other side)