Filter
Top Products
3
• Turn the assembly upright.
• Fit the tabs on to the bottom of the wall assembly into the slots in the base.
Hint: If the tabs on the wall assembly do not seem to fit, turn it around and try again!
• Push near each tab to “snap” in place.
3
Assembly
• At an angle, fi t the peg on one side of the peek-a-boo door into the socket in the wall.
• Then, push to “snap” the other peg in place.
• Fit the tabs on the hut roof into the slots in the tree. Push to “snap” in place.
4
5
Peek-a-boo Door
Hut Roof