Assembly
• First, insert the long handlebar
through the hole in the pony head
A
.
Hint: You may need to turn the long handlebar to fit it into
the hole.
• Then, insert the short handlebar through the hole on the
other side of the pony head
B
.
• While holding the handlebars in place, carefully tip the pony
so that the short handlebar faces up.
• Insert a screw into the hole in the short handlebar
and tighten.
3
• Turn the assembly upright.
• Fit the seat onto the assembly.
• Insert two screws into the holes on each side of the seat
and tighten.
3
Seat
4
Long
Handlebar
Short
Handlebar
A
B