Filter
Top Products
• While holding the pedal hubs on the pedal axle, insert the
pedal axle through the hole in the center of the front wheel.
• Push the pedal hubs into the center of the front wheel until
they are ush with the surface of the front wheel.
Hole
Pedal Axle
Pedal Hubs
Front Wheel
• Fit the pedal on the pedal axle. Tap the pedal with
a hammer until it is secure.
• Pull the pedal up to be sure it is secure. If you can remove
it, you have not secured it properly. Tap it with the
hammer again.
Pedal Axle
Scrap Block of Wood
Pedal
Pedal Hub
Pedal Hub
• Turn the front wheel
assembly over.
• Insert the remaining pedal hubs on top of and below the
pedal axle and into the hole in the center of the front wheel.
• Push the pedal hubs into the center of the front wheel until
they are ush with the surface of the front wheel.
• Place the front wheel assembly between the fork arms.
Make sure the pedal axle ts into the groove at the bottom
of each fork arm.
• Place a fork cover over the pedal axle on one fork arm.
• Insert two #8 x
3
/4" screws into the fork cover and tighten.
• Repeat this procedure to attach the other fork cover to the
other fork arm.
Fork Arms
Pedal Axle
Groove
Fork Cover
Assembly
4
5
6
7
8