This package contains small parts in its unassembled
state. Adult assembly is required. Take extra care
during unpacking and assembly.
CAUTION
Assembly
• Fit a fin into each side of the body.
• Insert a screw into the fin and tighten.
• Fit the tabs on one of the side rails into the slots in the body.
Push to "snap" in place.
Hint: The side rails are designed to fit one way. If they do not seem
to fit, try the other side.
• Repeat this procedure to assemble the other side rail.
Assembled Parts
2
Handlebar
(2 Pieces)
Seat
Body
2 Side Rails
2 Fins
Base
1
2
#8 x
1
/2" Screws – 12
Shown Actual Size
Note: Tighten and loosen all screws with a Phillips
screwdriver. Do not over-tighten screws.
Body
Side Rail
Fin
Fin
Screw