Filter
Top Products
13
• Place a receiver where you can see and hear it.
• Unwrap and fully extend the AC adaptor cord for best reception. Insert the AC adaptor pin into
the DC input jack on the receiver and plug into a standard wall outlet.
Note: To use battery power, refer to the Receiver Battery Installation section.
• Turn the power/volume dial up to turn the power ON. The power light will light up. Adjust the volume
as needed.
Hint: If you are using battery power and the battery power is low, the low battery indicator will fl ash.
Replace the batteries with three, new alkaline “AAA” (LR03) batteries or use the AC adaptor as
a power source.
• When sound is picked up by a receiver, the sound lights turn on.
- One or two lights indicate quieter sounds.
- Three or more lights indicate louder sounds.
• Clip the receiver onto your clothes to stay in touch with baby around your house or yard.
Hint: The receiver’s range is up to 500 feet (152 m) away from the transmitter. The range indicator will
turn on and you will hear a tone when the receiver is out of range.
Setup