3
Squeeze the stem on the ball to inflate it.•
Fit the T-end of the ball strap up through •
the slot under the assembly.
1
5
1
4
Fit the feet onto the end of each leg. Push to•
“snap” each foot in place.
Hint: Each foot is designed to fit one way.
If it does not seem to fit, turn it around
and try again.
1
3
Fit the rear legs into the body, as shown.•
Insert the four screws into the holes near •
the rear legs and tighten.
Rear Legs
Feet
Feet
Assembly
BOTTOM VIEW