Filter
Top Products
8
3
To tighten the restraint belts:
• Feed the anchored end of the restraint belt up through the buckle
to form a loop
A
. Pull the free end of the restraint belt
B
.
To loosen the restraint belts:
• Feed the free end of the restraint belt up through the buckle to
form a loop
A
. Enlarge the loop by pulling on the end of the loop
toward the buckle. Pull the anchored end of the restraint belt to
shorten the free end of the restraint belt
B
.
Anchored End Anchored End
TIGHTEN
LOOSEN
Free End Free End
Setup and Use
Power Switch
• Make sure your child is properly secured in the seat.
• Slide the power switch to: Vibrations or Off.
IMPORTANT! Low battery power causes this product to operate
erratically: no vibrations and the product may not turn off.
Remove and discard the battery and replace with a new
“D” (LR20) alkaline battery.
• Pull the ring on the toy for music and sounds.
Soothing Unit
Battery Removal
• Before disposing of the toy bar, please remove the batteries.
• Loosen the screws in the battery compartment door. Remove and
dispose of the batteries safely.
B
C
A
Care
A
To remove the pad:
• Pull to remove the pad from around the retainers and the soothing
unit
A
.
• Remove the bottom pocket of the pad from the footrest
B
.
• Lift to remove the pad
C
.
• To replace the pad, refer to Assembly steps 7 and 8.
• The pad and body support are machine washable. Wash them
separately in cold water on the gentle cycle. Do not use bleach.
Tumble dry separately on low heat and remove promptly.
• The frame, toy bar and toys may be wiped clean using a mild
cleaning solution and damp cloth. Do not immerse the toy bar.
Do not use bleach. Do not use harsh or abrasive cleaners.
Rinse clean with water to remove residue.