Filter
Top Products
3
Assembly
2
• Position one of the swing housings so that the swing arm is
facing the inside of the assembly.
• Fit the swing housing onto the frame tube.
Hint: The swing housing is designed to fit one way. If it does not
seem to fit, try assembling it to the other frame tube.
Swing Arm
Frame Tube
1
• Insert and “snap” the base into the sockets in each side of the
frame, as shown.
Hint: The base is designed to fit one way. If it does not seem to fit,
turn it around and try again.
Base
Frame
IMPORTANT! Before assembly and each use, inspect this product
for damaged hardware, loose joints, missing parts or sharp
edges. DO NOT use if any parts are missing or broken. Contact
Fisher-Price
®
for replacement parts and instructions if needed.
Never substitute parts.
4
• Insert an M6 x 25 mm screw into the hole in the swing housing.
Fully tighten the screw with the Allen wrench.
• Repeat this procedure to assemble the remaining swing housing
to the other frame tube.
• Fit the tabs on the seat bottom into the slots in the seat back.
3
Seat Back
Tabs
Seat Bottom