Filter
Top Products
15
Attaching the Seat To the Frame
Door
Chair
Attachment
Straps
• Turn the seat over and open the door. Carefully fit the chair
attachment straps into the compartment.
1
IMPORTANT! Close the door completely. If you do not close
the door, the seat will not fit on the high chair base.
2
• Fit the seat onto the high chair frame. Push to "snap" into
place. Pull up on the seat to be sure it is secure to the high
chair frame.
3
Storage
• Pull the frame release latches forward and push the rear legs
toward the front legs.
• The tray, pads, seat, seat attachment straps and restraint
belts may be wiped clean using a mild cleaning solution and
damp cloth. Do not use bleach. Do not use harsh or abrasive
cleansers. Rinse clean with water to remove residue.
To remove the pad:
• Push to remove the shoulder belts, waist belts and crotch
belt from the seat and pads.
• Unfasten the straps and loops on the seat back and
seat bottom.
• Remove the pads from the seat.
• To replace the pad and restraint straps, refer to the assembly
instructions in this manual.
IMPORTANT! Be sure to replace the restraint system. Never
use this product without the restraint system when used as a
high chair or when attached to an adult chair (until your child
can get in and out of the product without help).
Care