Interchangeable
Drill Bits
Real Drillin' Action!
• Pull the drill bit out of the end of the drill.
Hint: To replace the drill bit, simply insert
into the socket in the drill.
• Store the drill bit in the tool caddy.
• Insert and snap the other drill bit into
the end of the drill.
• Slide the switch on top of the drill for
forward and reverse drilling action!
• Press and hold the trigger to drill
the screws into the holes in the toolbox.
Hint: If the drill stops while you are using
it, release the trigger and then squeeze
it again.
Drill Bit
Forward
and Reverse
Switch