Filter
Top Products
Assembly
1
• Fit the numbered legs into the numbered
slots in the underside of the base.
Hint: There are two sets of legs. Each set is
marked with a “1” or a “2”. Match the numbers
on the legs to the numbers in the slots.
2
3
• Insert a screw into the hole in each leg.
IMPORTANT! For proper function, follow
this step carefully.
Tighten • all four screws with a Phillips
screwdriver.
CAUTION
This package contains small
parts in its unassembled state.
Adult assembly is required.
#8 x ¾” Screw – 4
Shown Actual Size
Screws