Filter
Top Products
Assembly
Fork Post
Lower
Steering Ring
Fork Cover
• While holding the lower steering ring in place, insert the
fork post up through the hole in the neck of the frame.
Make sure the fork is positioned so that the fork covers
face the rear wheels.
• Fit the upper steering ring onto the frame, as shown.
REAR OF TRIKE
• Fit the handlebar front to the fork post, as shown.
• Fit the handlebar back to the fork post and handlebar front.
Hold them together rmly.
• Insert the remaining #8 x ¾" screws through the outer
holes in the handlebar back and tighten.
Handlebar Front
¾" Screw
¾" Screw
Handlebar Back
Fork Post
6
Upper
Steering Ring
• Insert the #8 x 2¼" screw through the center hole in the
handlebar back and tighten.
2¼" Screw
9
11
12
10