Filter
Top Products
6
Assembly
9
• Insert four screws into the fence and tighten.
Screws
7
• At an angle, first fit the tab on the back of the house into the slot
in the bin assembly .
• Then, push down on the house to “snap” the tab on the front of
the house into the slot in the bin assembly .
House
Back Tab
Front Tab
Fence
8
• Turn the assembly so that the back is facing you.
• Fit the fence onto the back of the assembly.
BACK VIEW
6
• Insert four screws into the bin assembly and tighten.
Screws