Filter
Top Products
3
Straps
Overhead Gym
1
• Place the quilt, print side up, on a
flat surface.
• Fit the "T" end of each strap on the quilt
through the slots in the supports. Pull up
on the quilt to be sure it is secure.
Straps
Slots
Quilt
Supports
2
• Locate both straps on the bottom of one
of the tubes.
• Fit the ends of each strap into the
support post.
• Turn the support over and fasten
the straps.
• Repeat this procedure to attach the
remaining tube ends to the supports.
Tubes
Straps
Support