Filter
Top Products
8
P4266pr-0920
Rear Axle
Children can be harmed by small parts,
sharp edges and sharp points in the vehicle's
unassembled state, or by electrical items.
Care should be taken in unpacking and
assembly of the vehicle. Children should
not handle parts, including the battery,
or help in assembly of the vehicle.
• Slide the rear axle through the hole in the motor in the back
end of the vehicle.
• Plug the charger connector into the battery
A
.
• Plug the charger into a standard wall outlet
B
.
Notes:
- Use the charger only in a wall outlet. Do not plug the AC
adaptor into a ceiling outlet.
- If power flow to the wall outlet is controlled by a switch,
make sure the switch is “ON”.
- The power indicator on the charger does not indicate the
charge status of your battery. The power indicator allows
you to see that there is power from the wall outlet.
• Before first-time use, charge the battery for at least 18 hours.
Never charge the battery longer than 30 hours.
• Recharge the battery for at least 14 hours after each use of
your vehicle. Do not charge the battery longer than 30 hours.
• Once the battery is charged, disconnect the charger connector
from the battery. Unplug the charger from the wall outlet. The
battery is now ready to be installed in your vehicle. Please
see the Battery Installation section on page 20 for detailed
instructions on installing your battery. If your battery is already
installed in your vehicle, simply re-connect the motor harness
connector to the battery.
1
ASSEMBLY
WARNING
Rear Wheel
• Slide a rear wheel onto the end of the rear axle.
2
SIDE VIEW
Charger
Charger
Connector
Battery
B
A
Motor