Filter
Top Products
4
Turn the seat bottom upside down on a flat surface. •
Position a back leg so that it curves up and fit it into a large •
socket in the seat bottom.
Hint: If the leg does not seem to fit into the seat bottom socket,
try the other back leg.
Fit the other back leg into the large socket in the seat bottom.•
Insert an M5 x 60mm screw into the side of the seat bottom •
and tighten.
Push the back leg until it • "snaps" in place.
Insert an M5 x 60mm screw into the side of the seat bottom •
and tighten.
Push the back leg until it• "snaps" in place.
Assembly
1
3
4
2
IMPORTANT! Before assembly and each use, inspect this product
for damaged hardware, loose joints, missing parts or sharp edges.
DO NOT use if any parts are missing or broken. Contact Fisher-Price
®
for replacement parts and instructions if needed. Never substitute parts.
Back Leg
Large Socket
Seat Bottom
Back Leg
PUSH
PUSH
M5 x 60mm
Screw
M5 x 60mm
Screw