Filter
Top Products
10
Adult Set-Up
(TV Connect Mode)
IMPORTANT! Your TV or VCR/DVD must have audio
and video input jacks.
• Plug the audio-video pins on the receiver into the
matching colored input jacks on your TV or VCR/DVD
(yellow for “Video In” and white for “Left Audio In”).
• Place the pony in front of the receiver.
- The pony should be at least 3 but no more than
15 feet from the receiver.
- Make sure the receiver is placed fl at, either
on ground level or no more than 5 feet off of
the ground.
- Make sure the receiver is centered in front of
the pony.
- Make sure there is a clear path between the
pony and the receiver.
• Turn your TV or VCR/DVD power on.
• Slide the power switch on the receiver to On
.
Slide the power/mode switch on the pony to
TV Connect
.
Hint: The L.E.D. on the receiver should always be on
and will fl ash when there is a wireless connection to
the pony. When baby spins on the pony, there will be
a 160° range of wireless connection.
• To fi nd the picture on your TV screen, set your TV’s or
VCR’s/DVD’s mode selector to INPUT or VIDEO IN.
• To adjust sound in TV Connect Mode, use your TV or
VCR/DVD volume control.
TV
INPUT
AUDIO IN
LEFT
VIDEO IN
OR
White
Yellow
TV
VCR/DVD
5 Feet
3–15 Feet