Filter
Top Products
3
IMPORTANT! Before assembly and each use, inspect this
product for damaged hardware, loose joints, missing parts or
sharp edges. DO NOT use if any parts are missing or broken.
Contact Mattel for replacement parts and instructions if needed.
Never substitute parts.
• Please read these instructions before assembly and use of
this product.
• Adult assembly and setup is required. No tools needed for
assembly or setup.
• Product features and decorations may vary from photos.
• Australia: Mattel Australia Pty. Ltd., 658 Church Street,
Locked Bag #870, Richmond, Victoria 3121 Australia.
Consumer Advisory Service 1300 135 312.
• New Zealand: 16-18 William Pickering Drive,
Albany 1331, Auckland.
Parts
Consumer Information
Seat with Restraint System and Attachment Straps
Seat Back with Restraint System
Pad
Tray
Care
• The pad, seat, seat back and straps may be wiped clean
using a mild cleaning solution and damp cloth. Do not
use bleach. Do not use harsh or abrasive cleansers. Rinse
clean with water to remove residue.
• The tray is top rack dishwasher safe (or use the bottom
rack - without using the drying cycle).
To remove the pad:
• Push to remove the shoulder straps from the slots on the
waist restraint buckle.
• Lift the top of the pad off of the seat back.
• Fit the shoulder belts back through the slots in the pad.
• Unfasten the pad hooks from the front edge of the seat.
• Unbuckle the waist belts from the crotch belt.
• Fit the crotch belt down through the slot in the pad.
• Fit the waist belts back through the slots in the pad.
• Remove the pad from the seat.
• To replace the pad: refer to Assembly steps 2 - 6.
IMPORTANT! Never use this product without the restraint
system. Replace the crotch, waist and shoulder belts for
high chair use; replace the crotch and waist belts for
booster seat use.