Filter
Top Products
Assembly
• Position the base so that the bottom
is upright.
• Fit both front legs to the bottom of the
base, as shown.
• Insert two screws into the front legs
and tighten.
3
Base
Front Legs
Rear Legs
• Fit both rear legs to the front legs,
as shown.
• Insert four screws into the rear legs
and tighten.
• Set the assembly upright.
• “Snap” the microphone holder to the
side of the assembly.
Microphone
Microphone
Holder
• Set the microphone into the micro-
phone holder.
1
2
3
4