Filter
Top Products
4
Assembly
Drawbridge
• Position the drawbridge so that the door-
knocker is facing down.
• Insert the peg on one end of the drawbridge
into the hole in the base of the castle.
• Bend the drawbridge slightly and insert the
other peg into the other hole in the base of
the castle.
Spire
Horn
Peg
• Fit a horn onto the peg on each side of the spire.
• Insert a screw into each horn. Tighten
the screws.
1
1
1
2
• Fit the spire onto the top of the castle, being
sure that the tube on the bottom of the spire
fits over the flat post.
• Press down on the spire to “snap” it into place.
Flat Post
Spire
Tube
1
3
Balcony
•
“Snap” the balcony into the slots in the front
of the castle.
1
4