Filter
Top Products
Assembly
• Place the mat, print side up, on a flat surface
• Fit both straps on each side of the mat down
through the slots in the supports. Make sure the
tab on the end of the strap forms a "T" under
the support.
• “Snap” both tabs on the mat into the slots in
the support.
• Pull up on the mat to be sure it is secured to
the supports.
1
2
3
• Fit the palm tube and the giraffe tube into the
openings in the supports, as shown.
Mat
Support
Giraffe Tube
• Fit the ends of the long tube into the openings in the
supports, as shown.
Long Tube
Palm Tube
Tab
Strap