Filter
Top Products
H4435pr-0920
7
• Position the steering wheel with the large opening UP.
• Position the steering column so that the bend is UP, as shown.
• Fit the steering column through the center hole in the steering wheel.
Steering Wheel
Large Opening
Steering Column
Bend
Upright
Large Opening UP
• While holding the steering wheel, grasp the steering column and
push it up as far as it will go.
• Insert the
5
/32" x 1½" pin through the hole in the end of the
steering column.
• Now, pull the steering column down to fit the pin into the grooved
area in the center of the steering wheel.
• Fit the steering cap into the center of the steering wheel. Be sure to
align the notch in the steering wheel cap with the tab in the center
of the steering wheel.
• Insert two #8 x ¾" screws into the steering wheel cap. Tighten
the screws.
Steering Wheel Cap
Steering Wheel
• Place the dashboard on the top side of the vehicle, as shown.
• Insert five #10 x 1" screws into the dashboard. Tighten the screws.
Dashboard
4
10
ASSEMBLY
F
5
6
K4564pr-0923
5
/32" x 1½" Pin
End of Steering Column
PUSH
PULL