Filter
Top Products
4
Battery Installation
Hint: We recommend using alkaline batteries for longer battery life.
• Loosen the screws in mobile base battery compartment door and remove
the door.
Hint: If the crib adaptor is attached to the base, loosen the screws in the crib
adaptor and remove first.
• Insert three "D" (LR20) alkaline batteries.
• Loosen the screw in the remote battery compartment door and remove the door.
• Insert two "AA" (LR6) alkaline batteries.
• Replace each battery compartment door and tighten the screws.
Note: Under normal use conditions, the batteries in the base will require
replacement more often than the batteries in the remote. When sounds or light
become faint or movement of the mobile is sluggish, it's time for an adult to
replace the batteries in the base.
• If the mobile base begins to operate erratically, you may need to reset the
electronics. Slide the power/volume switch off and back on. If the remote
begins to operate erratically, you may need to reset the electronics. Remove the
batteries and reinstall them.
©2012 Mattel. All Rights Reserved.
PRINTED IN CHINA K3799c-0920
1,5V x 3
“D” (LR20)
1,5V x 2
“AA” (LR6)
Mobile Base Remote