Filter
Top Products
Foot
• Fit the cap into the center of the post.
Cap
Base Piece
• Insert six screws into the cap and tighten.
• Turn the assembly upright.
• Fit and “snap” each base piece between the spaces in the feet.
Hint: The base pieces are designed to be asssembled to any of
the openings between the feet, and is a one-time assembly.
Post
• Position the zebra upside-down.
• Fit the tube end of a foot into one of the holes inside the post.
• Assemble the other five feet into the post.
Assembly
1
2
3
4